Deutsch 
Espanol 
Francais 
Italiano 
Portugues 
Japanese 
Arabic 
Russian 
Problems that may occur in the process of stainless steel cutting
Problems that may occur in the process of stainless steel cutting
|
First, the strength of stainless steel is easily deformed. During the machining and cutting process of stainless steel, because of its inevitable elongation, especially austenitic stainless steel, it will undergo relatively large plastic deformation, which will inevitably make the machining difficult. In addition, the strength of stainless steel itself is greater, which increases the double resistance in the cutting process and strengthens the cutting strength. |
Second, the cutting temperature of stainless steel is high. A large amount of heat will occur during the cutting process, but the stainless steel material is also poor in thermal conductivity, so the heat is concentrated on the cutting area and the blade, which is not easy to dissipate heat.
Third, the difficulty of cutting. Stainless steel machining is a hard material with good plasticity and toughness, but at the time of processing, the cutting squeezes the stainless steel profile because it is not easy to break and easy to stick, resulting in excessive tool wear (this is because the tool wears, causing the knife surface to occur Potholes, forming small peelings and gaps; plus the high hardness of stainless steel, direct contact with the tool during cutting, friction, scraping the tool, and work hardening, all will increase the tool wear), so the stainless steel profile processing deteriorates .
Fourth, stainless steel is easy to expand. In the cutting process, a large amount of heat will occur, which will cause the stainless steel to expand, which makes the cutting process more difficult.
|
PTJ Machining Capabilities |
|
Automatic Bar Machining – Multi-spindle cam automatic screw machines CNC Turning – CNC delivers peak cost efficiency in shorter volumes, as well as high capacity production of mechanically simple components Custom Machining - with up to 12 axes of control Multi Spindle Machining- ISO 9001:2015 certified Screw Machine Products – The number of customized production parts per hour can reach 10000pcs Swiss Machining – with up to 9 axes of CNC control, to produce precision components with complex geometries in one operation High Volume Machining – 100 Advanced Production Turning Bar Automatics On-line and Ready CNC Milling - Machining Fully compliant with the exacting requirements of our customers 5 axis (11 axis) Machining – Tolerance | 0.1mm alignment |
What Can we help you do next?
∇ Get more information about cnc machining Shop
→Case study-Find out what we have done.
→Ralated tips about cnc machining services
By PTJ Manufacturing Shop|Categories: Blog|Tags: cnc milling services, cnc turning services, milling parts, turning parts, machining parts, special parts,faqs,technical news,company news,material news |Comments Off